Lexus Pickup Truck: GX 550 Front End on a Tacoma at SEMA 2026

Lexus does not sell a pickup, so one Tacoma owner built the Lexus pickup truck himself. This 4th gen Toyota Tacoma wears a full Lexus GX 550 front end, and it was one of our favorite trucks on the floor at SEMA 2026. We stopped to talk with the owner's brother, who walked us through the build and showed us the one feature almost nobody noticed.

The short version: a GX 550 front clip molded in fiberglass, custom fenders and 3D printed trim on a 4th gen Tacoma, built over 6 to 8 months. The factory hybrid drivetrain stays, with a tune and bolt-ons the team says put it close to 400 horsepower and 500 lb-ft. The hidden feature is a tailgate setup with its own stereo.

Why Build a Lexus Pickup Truck at All

The answer was simple: it does not exist. The owner wanted Lexus luxury with real truck capability, and he sees Lexus growing in the off-road world. The truck is a concept, built partly to show Lexus what a Lexus pickup could look like. The team says the response to it has been huge.

It is also not a trailer queen. It is built to be driven every day, and the owner is not selling it.

The GX 550 Front End, Molded From Scratch

The whole front end was made as a mold, and the fenders are custom fiberglass. They started from 4th gen Tacoma fenders that the team modified to blend into the GX 550 nose. Every gap between the Lexus face and the Toyota body is filled with small 3D printed pieces, which is a big part of why the conversion looks factory instead of bolted on.

A few details stood out to us up close:

  • Integrated roof lights. The top lights look like part of the cab instead of sitting on a separate bracket. The mount is 3D printed, and the team says Baja Designs plans to make it for customers, so keep an eye on the Baja Designs site.
  • A painted metal bumper. Painted on purpose, to keep the luxury look.
  • Lexus inside. A Lexus steering wheel sits in the cab.
  • Reworked taillights. Because the Tacoma tailgate moves, the small parts around the lights look custom made to work with it.
  • Upgraded suspension. The arms are replaced, including the upper control arms.

Hybrid Power, Turned Up

Under the hood it is the factory Tacoma hybrid drivetrain, not an engine swap. The team added a downpipe, intake, charge pipes and a tune, and they put the output close to 400 horsepower and 500 lb-ft of torque. That is a lot of truck, and keeping the factory drivetrain is what makes daily driving it realistic.

The Hidden Feature: A Tailgate Stereo

When we asked what everyone was missing, the answer was the tailgate. Drop it and there is a full tailgate setup: a stereo, cup holders, its own controls, USB charging and speakers, all trimmed to match the interior. It is built for game days, soccer games and any time the truck becomes the hangout spot.

That is a great reminder that audio on a truck does not have to stop at the cab. If you are planning your own tailgate or cabin upgrade, start with clean power and a clean signal. Our guide to what an amplifier does for factory speakers is a good first read.

Building Your Own 4th Gen Tacoma?

A GX 550 front end is a one off. These upgrades are not, and they plug into a 2024 and newer Tacoma with no cutting:

If you drive the real GX 550, our GX 550 amp install mistakes guide covers the audio side of that truck.

Lexus Pickup Truck Build FAQ

Is this a real Lexus pickup?

No. Lexus does not make a pickup. This is a 4th gen Toyota Tacoma converted with a custom Lexus GX 550 front end, built as a concept.

How long did the build take?

About 6 to 8 months.

Is the engine swapped?

No. It keeps the factory hybrid drivetrain with a downpipe, intake, charge pipes and a tune, and the team says it makes close to 400 horsepower and 500 lb-ft.

What is the hidden feature?

A tailgate setup with a stereo, cup holders, controls, USB charging and speakers, trimmed to match the interior.

Can I buy the roof light mount?

The team says Baja Designs plans to sell it. Check the Baja Designs website.

Bring Your Tacoma to La Mirada

Want your Tacoma to stand out without a fiberglass mold? Our La Mirada, California team handles plug and play audio, camera and throttle installs, and most trucks leave the same day. Talk to our installers about your Tacoma.

Leave a comment

Please note, comments must be approved before they are published