Encore Boost vs ENA-2T3 + ACS-T02: Toyota JBL Sub Upgrade
If you drive a Toyota with factory JBL and want to add a subwoofer, the Encore Boost is now the simplest way to do it: one plug and play unit that does the job the ENA-2T3 and ACS-T02 used to do as a pair. It drives your factory JBL amp harder and gives you RCA outputs that follow your factory volume, so a powered sub sits right in the mix. Pre-orders are open now, and units ship the first week of December 2026. You pay at checkout to reserve yours.
Â
Should you buy the Encore Boost or the ENA-2T3 plus ACS-T02? If your Toyota has factory JBL and you want sub outputs, buy the Encore Boost. It covers both jobs in one box for $349, against $458 for the two-piece setup. If you only want more output from your JBL system and never plan to add a sub, the ENA-2T3 on its own is still the lower cost option.
Â
Here is the product page: Encore Boost plug and play line driver for Toyota JBL. Pick your vehicle there and we ship the version that fits your truck or car.
Â

Â
Which One Should You Buy?
If your Toyota has factory JBL and it is on the Boost fitment list, pick the line that matches your plan:
- No powered sub, ever: the ENA-2T3 ($299). More output from your JBL system and nothing you will not use.
- A powered sub now or later, and you can wait for shipping the first week of December 2026: the Encore Boost ($349, pre-order, you pay at checkout). One unit, RCA outputs that follow your factory volume, and a remote turn-on.
- A sub that follows your factory volume, and you cannot wait: the ENA-2T3 plus the ACS-T02 ($299 + $159 = $458). Both ship now. Newer JBL models only (for example 2022 and newer Tundra, 2024 and newer Tacoma, 2025 and newer 4Runner). On older JBL models the matching harness is the ACS-T01, which releases in December 2026.
- A sub, you cannot wait, and you are fine setting the sub level by hand: the ENA-3T3 ($349). It ships now. On a JBL Toyota its RCA level does not follow the factory volume, so you set the sub with the level knob on the sub's own amp.
A few other cases:
- Highlander or Venza with JBL and the 12.3 inch screen: the ENA-2T3 is not compatible with these models, so it is not an option for you. Check your exact vehicle on the Encore Boost product page before you order.
- You already own an ENA-2T3 or ENA-3T3: add the ACS-T02 ($159) on a newer JBL model, or the ACS-T01 ($159, releasing December 2026) on an older one, for sub outputs that follow your factory volume. You do not need a Boost.
- You already have an aftermarket amp and sub that work: the ENA-2T3 on its own.
- Your Toyota does not have JBL: the ENA-2T3 if you will not add a sub, the ENA-3T3 if you will. The Boost, the ACS-T02 and the ACS-T01 are for factory JBL only.
- Lexus: the Boost, the ACS-T02 and the ACS-T01 are for Toyota JBL only.
- 2026 or newer RAV4 with JBL: nothing fits yet. Email us and we will let you know when something does.
- 2027 Tundra or Sequoia with JBL: the Encore Boost, ENA-2T3 and ENA-3T3 are not compatible.
Â
Encore Boost Key Details at a Glance
- Price: $349, compared with $458 for the ENA-2T3 plus ACS-T02.
- Availability: pre-order now. You pay at checkout to reserve one, and orders ship the first week of December 2026.
- Fits: Toyota models with the factory JBL premium sound system only. Non-JBL Toyotas and Lexus vehicles are not on the fitment list.
- Versions: two, one for older JBL systems and one for current ones. Pick your vehicle and we ship the right one.
- Outputs: 2-channel, full-range RCA pre-outs that follow your factory volume, plus a remote turn-on output.
- Gain: adjustable from -11 dB to +9 dB.
- Install: vehicle-specific plug and play harness, no cutting or splicing. Ultra-compact, mounts behind the dash.
- Current draw: 0.1 A typical, 1 A max.
- Made in: Japan.
- Sold separately: powered subwoofer, RCA cables, and power and ground wiring for the sub.
- Installation: available at our La Mirada, CA shop.
Â
What the Encore Boost Is, in Plain Terms
The Encore Boost is a line driver amplifier. It plugs in between your factory head unit and your factory JBL amplifier using a vehicle-specific harness. It does two things at once.
First, it sends the JBL amp a stronger signal. You set how much with a gain control that runs from -11 dB to +9 dB, so you can add real output or dial it back if your ears and your speakers prefer a lighter touch.
Second, it gives you 2-channel, full-range RCA outputs that track your factory volume, including the steering wheel buttons. Turn the radio down and your sub comes down with it. That is the part most Toyota JBL owners have been chasing, because factory JBL has no subwoofer output at all. If you want the full background on why, our post on why Toyota JBL has no subwoofer output walks through it.
There is also a remote turn-on output, so your powered sub, external amp or DSP switches on and off with the car. Browse the rest of our plug and play amplifiers for Toyota and Lexus if you are comparing options.
Â
Encore Boost vs ENA-2T3 Plus ACS-T02: Toyota JBL Side by Side
Until now, a Toyota JBL owner who wanted a sub bought two parts. The Encore Alpha ENA-2T3 amplifier kit went in first, then the ACS-T02 powered subwoofer controller replaced its harness to add volume-synced RCA outputs. The ACS-T02 is not a standalone part, so the pair was the only way to do it. The ACS-T02 fits newer JBL models; older JBL models get the ACS-T01, releasing December 2026.
The Encore Boost folds that into one unit.
| Encore Boost | ENA-2T3 + ACS-T02 | |
|---|---|---|
| Price | $349 | $299 + $159 = $458 |
| Parts to buy | 1 | 2 |
| Volume-synced RCA outputs | Yes, 2-channel full range | Yes, through the ACS-T02 |
| Remote turn-on output | Yes | Yes, through the ACS-T02 |
| Factory JBL required | Yes | Yes, for the ACS-T02 |
| Cutting or splicing | None | None |
| Availability | Pre-order, ships first week of Dec 2026 | Available now |
That is $109 less for the same goal, with one harness behind the dash instead of two parts that have to be matched.
Â
Who should still buy the ENA-2T3 on its own
If you are happy with the bass you have and just want your JBL system to play louder and cleaner, the ENA-2T3 alone at $299 is the budget pick. Our RAV4 amplifier upgrade on factory JBL shows what that sounds like with no new speakers.
The catch is planning ahead. If there is any chance you will want a sub next year, buying the ENA-2T3 now and adding the ACS-T02 later costs you $458. Buying the Boost now costs $349 and leaves the sub outputs ready when you are.
Â
What if my Toyota does not have JBL?
The Encore Boost is built only for the factory JBL premium sound system. On a non-JBL Toyota, look at the ENA-3T3 amplifier kit with subwoofer output instead. Our guide to what changes with a plug and play amp on JBL vs non-JBL explains the difference.
Not sure which system you have? Look for the JBL logo on the door speaker grilles. If you still are not sure, send us your year, model and trim before you order.
Â
Which Toyota Models Get the Encore Boost
There are two versions of the Encore Boost, one for older JBL systems and one for current ones. You do not need to work out which is which. Choose your vehicle on the product page and we ship the right one.
Coverage includes factory JBL versions of these Toyota models, across the years listed on the product page:
- 4Runner, Tacoma, Tundra and Sequoia
- Camry, Avalon, Corolla, Corolla Cross, GR Corolla and Prius
- RAV4, Highlander, Grand Highlander, Sienna and Venza
- Land Cruiser, Crown, Crown Signia, C-HR, bZ4X, bZ and bZ Woodland
Years vary by model, so check your exact year on the Toyota audio and electronics upgrades page or on the Boost product page before you order.
Â
How the Encore Boost Install Works
This is a plug and play install. Nothing factory gets cut or spliced, and the unit is compact enough to mount behind the dash.
1. Confirm factory JBL
Check the speaker grilles for the JBL logo, then pick your exact vehicle on the product page.
2. Plug the harness in line
The vehicle-specific harness connects between the factory head unit and the factory JBL amp. No wire taps.
3. Set the gain
Start low and bring it up. The Boost is engineered and tested to keep the factory JBL amp and speakers within factory tolerance, but there is no reason to run it higher than you need. Our post on whether an amplifier can damage factory speakers covers the logic.
4. Connect your sub or DSP
Run RCA cables and the remote turn-on lead to your powered sub, external amp or DSP. The sub, RCA cables, and the power and ground wiring for the sub are sold separately.
Â
What the Encore Boost Does Not Do
Being straight about the limits saves you a return.
- It does not power extra speakers directly. Any add-on speakers need their own amplifier.
- It does not include the subwoofer. You need a powered sub, meaning one with an amp built in. If space is the worry, see where to put a subwoofer without losing trunk space.
- Full-range speakers off the RCA outputs need a DSP. If you run add-on full-range speakers, use a DSP with adjustable delay so their timing lines up with the factory JBL speakers. Our guide on how to tune a DSP amplifier covers time alignment.
Doing a bigger dash project at the same time? Many owners pair audio work with a Toyota CarPlay and Android Auto kit or one of our front and backup camera solutions while the trim is already off.
Â
Frequently Asked Questions
When does the Encore Boost ship, and can I order now?
Yes. Pre-orders are open on the product page at $349. You pay when you place the pre-order, and orders ship the first week of December 2026.
I want a subwoofer but cannot wait until December. What should I buy?
Two options ship now. If you have a newer JBL model and want the sub to follow your factory volume, get the ENA-2T3 plus the ACS-T02 for $458. On an older JBL model the matching harness, the ACS-T01, releases in December 2026, so the Boost is the volume-synced option. If you are fine setting the sub level by hand with the knob on the sub's own amp, get the ENA-3T3 for $349. Both are for Toyota with factory JBL.
Does the Encore Boost replace the ENA-2T3 and ACS-T02?
For a Toyota with factory JBL that needs sub outputs, yes. The Encore Boost gives you the stronger signal to the JBL amp plus volume-synced RCA outputs and a remote turn-on in one unit, for $349 instead of $458.
Will the Encore Boost work on a non-JBL Toyota?
No. It is built only for the factory JBL premium sound system. For a non-JBL Toyota, look at the ENA-3T3.
Do the RCA outputs follow my factory volume?
Yes. The 2-channel, full-range RCA outputs track your factory volume control, including the steering wheel buttons, so your sub stays balanced at any volume.
Do I need to cut any factory wires?
No. The Encore Boost connects with a vehicle-specific plug and play harness, with no cutting or splicing.
Which version of the Encore Boost do I need?
There are two versions for different JBL generations. Pick your vehicle on the product page and we ship the one that fits. If you are unsure, send us your year, model and trim first.
Â
Pre-Order Your Encore Boost or Book the Install in La Mirada
Want it done for you? Our La Mirada, CA shop installs Beat-Sonic amps and subs on Toyota JBL systems, usually same day once your Boost arrives. Contact us to book your Encore Boost install and we will have your sub playing in time with your JBL system.