The Beat-Sonic SLX-43A is a plug-and-play audio integration adapter kit that allows you to install an aftermarket double DIN head unit into the 1999–2007 Toyota S170 Crown equipped with the Super Live Sound System (7-speaker including subwoofer) without factory navigation — while retaining your factory amplifier, all 7 speakers, and factory subwoofer. Made in Japan, with high-grade OEM connectors and all hardware included.
Important: the SLX-43A is a special order product sourced from Japan. It is non-refundable. By purchasing you agree to this condition.
Which kit do I need?
The Toyota S170 Crown comes in several audio and navigation configurations. Make sure to select the correct kit for your exact setup:
| Configuration | Correct Kit |
|---|---|
| Factory navigation with Super Live Sound System (7-speaker) | MVX-43B |
| Factory navigation with Royal Sound System (6-speaker) | MVX-43BR |
| No factory navigation with Super Live Sound System (7-speaker) | SLX-43A — this page |
| No factory navigation with Royal Sound System (6-speaker) or 4-speaker system | SLX-43AR |
Key features
- Retains factory amplifier, all 7 speakers, and factory subwoofer — woofer, tweeters, front door and rear door speakers all play through your new aftermarket head unit
- Factory speakers used as-is — no speaker changes needed
- Complete installation kit — includes integration adapter, double DIN fascia panel, mounting brackets, and nuts
- Compatible with Super Live Sound System (7-speaker including subwoofer) without factory navigation only
- Plug-and-play installation — high-grade OEM connectors, no splicing of factory wires required
- Made in Japan — Beat-Sonic quality construction and components
- 1-year warranty
Head unit requirements
- Single DIN or double DIN head unit with a built-in amplifier (speaker-level outputs). Audio and navigation units both work.
- Only the head unit's front speaker outputs are used. The rear outputs are not connected.
- The head unit's fader and DSP have limited effect. The factory fader and DSP can still be used.
Compatible vehicles
Show all compatible vehicles ▼
| Make | Model | Production Period | Notes |
|---|---|---|---|
| Toyota | Crown Royal | Sep. 1999 to Dec. 2003 | Super Live Sound System (7-speaker), without factory navigation |
| Toyota | Crown Athlete | Sep. 1999 to Dec. 2003 | Super Live Sound System (7-speaker), without factory navigation |
| Toyota | Crown Majesta | Sep. 1999 to Jul. 2004 | Super Live Sound System (7-speaker), without factory navigation |
| Toyota | Crown Estate | Dec. 1999 to Jun. 2007 | Super Live Sound System (7-speaker), without factory navigation |
Chassis codes: JZS171(W), JZS173(W), JZS175(W), JZS177, JZS179, UZS171, UZS173, UZS175, JKS175, GS171W.
Not compatible with the 6-speaker Royal Sound System or 4-speaker system (use the SLX-43AR) or with factory navigation (use the MVX-43B).
Not sure which kit you need? Email info@beatsonicusa.com with your production date, model, and sound system configuration before purchasing.
Factory features that will no longer work
- Audio controls on the factory switch panel, except POWER-VOL/MODE (FAD/BAL/MID/TBL) and SFC/ASL/ACS/POS
- The audio display on the factory switch panel no longer shows head unit information
- Steering wheel audio controls
- Rear controller
- Factory CD changer
- Hands-free
- Factory ETC may stop working. If other factory equipment then misbehaves, unplug the factory ETC connector completely.
Installation notes
- Before you start, confirm the factory deck works. If it does not work properly, the SLX-43A will not work either.
- Disconnect the negative battery terminal while wiring. Connect every terminal on the harness.
- The factory front finish panel is removed. The factory mounting holders are reused and must be modified: trim the bosses inside them that touch the supplied brackets. If the head unit hits the integration computer, file holes A and B down 1-2 mm.
- The factory power switch turns on the switch panel and factory amplifier only. Turn the head unit on separately.
- Volume works from both the factory panel and the head unit. Turn the factory volume down first, then raise both slowly.
- Some head units make a pop noise at key on or key off.
- After install, check that the brake lights, headlights, turn signals and wipers work.
Specifications
- Adapter dimensions: 40 x 25 x 81.6 mm (W x H x D)
- Adapter weight: approx. 280 g
What's in the box
- 1 x Integration adapter
- 1 x Double DIN fascia panel
- 2 x Mounting brackets (left and right)
- 6 x Nuts
- Instruction manual (Japanese) and warranty card
Frequently asked questions
How do I know which kit I need?
Check your sound system type and whether your Crown has factory navigation.
Super Live Sound System (7-speaker) with navigation = MVX-43B.
Royal Sound System (6-speaker) with navigation = MVX-43BR.
No navigation with 7-speaker = SLX-43A.
No navigation with 6-speaker or 4-speaker = SLX-43AR.
If you are unsure, email info@beatsonicusa.com with your production date and model.
Will my factory subwoofer still work?
Yes. The SLX-43A retains your factory amplifier, all 7 speakers, and the factory subwoofer.
Will my steering wheel audio controls work?
No. Steering wheel audio controls, the rear controller, factory CD changer and hands-free stop working.
Will this work on a Crown with factory navigation?
No. For a 7-speaker Crown with factory navigation, use the MVX-43B.
Can I return this product if it doesn't fit?
No. The SLX-43A is a special order product sourced from Japan and is non-refundable. Please confirm compatibility before purchasing.
How long does shipping take?
As a special order item sourced from Japan, lead times will be longer than standard stock items. Contact us at info@beatsonicusa.com for current availability and estimated shipping times.
Does this ship to Canada or internationally?
Yes. We ship to Canada and Mexico.