Beat-Sonic SKU: ENA-2T3-4R

Beat-Sonic ENA-2T3 Plug and Play Encore Alpha Power Amplifier Kit for Select 2018+ Toyota Models

$299.00

Shipping calculated at checkout

Available Now!
Description Reviews Videos FAQ & Manuals

Looking for the extra clarity from the music? Or the extra punch on the bass? We would like to introduce the plug and play solution to the fastest, easiest and the biggest noticeable improvement with your car vehicle system. (If using new aftermarket speakers, keep the impedance at 4 ohms for non JBL Models. )

FREE SOCAL LOCAL INSTALL FOR A LIMITED OF TIME  for vehicle models: 2025 Grand Highlander, 2025 Avalon, 2025 Sienna (In exchange, we would like to use your vehicle to video the installation/demonstration). Email us for information: info@beatsonicusa.com

Beat-Sonic ENA-2T3 Micro Power Amplifier Kit is the plug and play solution to significantly improve and enhance your factory stereo system. The kit is easy to install with no special tools required and no modifications to the factory harness.

Features:

    • Ultra-compact amplifier seamlessly installs to the factory stereo system
    • Additional RCA high level input for for even a higher quality sound
    • Significantly improve sound quality with a more clarity and powerful sound output between low, mid and high ranges.
    • Experience high resolution sound while keeping factory speakers and headunit.
    • Uses carefully selected acoustic components including high quality electrolytic and low impedance capacitors, extra copper thickness of 70μ to improve all frequencies from low to high.
    • Compact size allows for flexibility with installation location.
    • High-quality FET operational amplifier is used for input sections. Details of the music including artist's voice and breath tone will be expressed at a high resolution level.


Compatibility:

  • 2020-2025 Toyota 4Runner
  • 2019-2022 Toyota Avalon
  • 2018-2025 Toyota Camry
  • 2020-2025 Toyota Corolla
  • 2019-2025 Toyota Corolla Hatchback / GR Corolla
  • 2020-2023 Toyota Highlander (Not compatible with JBL + 12.3 inch screen models)
  • 2023-2025 Toyota Crown
  • 2024-2025 Toyota Highlander
  • 2024-2025 Toyota Grand Highlander
  • 2024-2025 Toyota Land Cruiser
  • 2023-2025 Toyota Mirai
  • 2020-2025 Toyota Prius
  • 2019-2025 Toyota RAV4
  • 2020-2025 Toyota Sequoia
  • 2018-2025 Toyota Sienna
  • 2020-2025 Toyota Tacoma
  • 2020-2025 Toyota Tundra
  • 2021-2025 Toyota Venza (Not compatible with JBL + 12.3 inch screen models)
  • 2019-2025 Lexus ES 350/300H with 8" display (not compatible with 12.3" display)
  • 2019-2025 Lexus UX 250H / 300H with 6 speakers (not compatible with 10-speaker Premium Sound)
  • 2021-2025 Lexus IS 300/350/500 without navigation
  • 2018-2025 Lexus NX 250/300/300H/350/350H without navigation
  • 2018-2023 Lexus RC 300/350/RCF without navigation
  • 2020-2025 Lexus RX 350/350h/450h/500h without navigation

Specifications

  • Maximum output 45W x 4ch (4Ω)
  • Compatible impedance 4-8Ω
  • Input sensitivity 0.5-5V
  • Frequency characteristics 15-80kHz (+0, -1dB)
  • Total harmonic distortion 0.01% (1kHz / 4Ω)
  • Power supply DC12V (minus ground)
  • Power supply voltage DC11V ~ 15V
  • Current consumption 0.2A (when there is no signal)
  • Fuse used 15A
  • Audio input AUX level (RCA)
  • Speaker level (supports high level input)
  • Dimensions 96 (W) x 40 (D) x 113.5 (H)
  • Weight 420g (main unit only)

Customer Reviews

Based on 103 reviews
94%
(97)
3%
(3)
2%
(2)
0%
(0)
1%
(1)
98.5
D
DJ
2024 RAV4 Adventure with JBL System

Settings before installing the pre-amp: Deck Volume (35), Highs (Maximum), Mids (Half past middle), Lows (Maximum). Result: Good. Settings after installing the pre-amp: pre-amp settings: Back (Maximum), Front (3 o'clock). Deck Settings: Deck Volume (22), Highs (Maximum), Mids (Half past middle), Lows (Maximum). Result: System is acoustically clearer and the bass is punchier with the same loudness as the previous setting of (35) without the pre-amp. DEFINITELY A VERY NOTICEABLE IMPROVEMENT WITH AN EASY PLUG-AND-PLAY INSTALL. The picture shows the pre-amp being fully connected while tuning the system and figuring out the best settings. Final installation of the pre-amp was behind the deck. Song used for tuning: PARTy T1M3 by Tyga & YG. Final Note: Deck Volume can be set to 25 without distortion. Anything higher, the EQ settings have to be reduced accordingly towards a FLAT setting. The system sounds great this way but quality of sound should always be more important than perceived loudness.

User picture
R
Ron
2024 Tacoma Sport with JBL

Installation was super easy. Price point was good. For the amount of space in the cab the amp did its job. Great sound quality. Toyota dropped the ball on the audio system.

A
Alex A
Worth every penny

Wanted to get more out of my jbl system in my '24 Land Cruiser. Definitely hit the spot. Better treble and lows too. Love it. Thank you

B
Bob S.
Worth the upgrade!

Installed in new 2025 land cruiser 1958. Definitely worth the upgrade as it made a big difference. Also upgraded my speakers and sound is wayyy better now. Sounded better even without speaker upgrade but even more so now. I'm very happy with performance given it's still working with stock headunit and not a full blown sound system. If your just looking to get the most out of stock head unit then this is worth it!

D
Dan C.
A must for the new Tacoma

Wow!! What a difference. Everything just sounds better. And the install was super easy and only took 10 minutes.

123

Please visit our Youtube Page

Do we ship to Canada?

- Yes, all products on our website ships to Canada

Do we ship outside the US & Canada?

- Yes, all products on our website ships outside US and Canada. However, certain products sales will be handled by Beat-Sonic Japan and will be shipped from Japan.