The Beat-Sonic ENA-2T3 is a plug-and-play amplifier kit that dramatically improves the sound quality of your factory Toyota or Lexus stereo - no cutting, no harness modifications, and no need to replace your head unit or speakers. More clarity. More bass. More detail. All from a single compact unit that installs in under two hours.

Professional local installation available in La Mirada, Southern California. Contact us at info@beatsonicusa.com to book.

Why your factory stereo sounds underwhelming - and how the ENA-2T3 fixes it

Toyota and Lexus factory head units are built to a cost. The amplifier stage inside your OEM radio or external JBL amplifier is one of the first areas where manufacturers cut corners, resulting in a flat, compressed sound even through otherwise decent factory speakers. The ENA-2T3 solves this by strengthening and optimizing the audio signal before it reaches your factory amplifier - giving it a cleaner, more powerful signal to work with, and allowing your factory system to perform closer to its true potential across all frequency ranges.

Your factory head unit, steering wheel controls, and speakers all stay in place and continue to work exactly as before. You simply get the sound your system was always capable of - finally unlocked.

Key features

Plug-and-play installation - no special tools, no harness modifications, no cutting
45W x 4-channel output - significantly more power than factory head unit amplification
High-quality FET op-amp input stage - reproduces fine musical detail including voice tone and breath at high resolution
Ultra-compact design - flexible installation location, fits easily behind the dash
High-level speaker input - additional RCA high-level input for even higher quality signal connection for an external media player
Premium acoustic components - low-impedance capacitors and 70μ extra copper thickness for improved frequency response across low, mid, and high ranges
Retains factory head unit - your display, controls, CarPlay, and all factory features continue to work normally
Compatible with aftermarket speakers - keep impedance at 4Ω-8Ω when using aftermarket speakers
Made in Japan

Specifications

Maximum output: 45W x 4ch (4Ω)
Compatible impedance: 4-8Ω
Input sensitivity: 0.5-5V
Frequency response: 15-80kHz (+0, -1dB)
Total harmonic distortion: 0.01% (1kHz / 4Ω)
Power supply: DC12V (minus ground), DC11V-15V range
Current consumption: 0.2A (no signal)
Fuse: 15A
Audio input: AUX level (RCA) + speaker level (high-level input)
Dimensions: 96mm (W) x 40mm (D) x 113.5mm (H)
Weight: 420g

Compatible vehicles

The ENA-2T3 is compatible with the following Toyota and Lexus models:

2020-2026 Toyota 4Runner
2019-2022 Toyota Avalon
2022-2026 Toyota bZ4X / bZ
2018-2026 Toyota Camry
2020-2026 Toyota Corolla & Corolla Cross
2019-2026 Toyota Corolla Hatchback / GR Corolla
2020-2023 Toyota Highlander (not compatible with JBL + 12.3-inch screen models)
2024-2026 Toyota Highlander
2023-2026 Toyota Crown
2024-2026 Toyota Grand Highlander
2024-2027 Toyota Land Cruiser
2023-2025 Toyota Mirai
2020-2026 Toyota Prius
2019-2025 Toyota RAV4
2026 Toyota RAV4 without JBL
2020-2026 Toyota Sequoia
2018-2026 Toyota Sienna
2020-2026 Toyota Tacoma
2020-2026 Toyota Tundra
2021-2024 Toyota Venza (not compatible with JBL + 12.3-inch screen models)
2026 Subaru Solterra
2026 Subaru Trailseeker
2026 Subaru Uncharted
2019-2025 Lexus ES with 8-inch display (not compatible with 12.3-inch display)
2019-2025 Lexus UX (not compatible with 10-speaker Premium Sound)
2021-2025 Lexus IS without factory navigation
2018-2021 Lexus NX without navigation
2018-2025 Lexus RC without navigation
2020-2022 Lexus RX without navigation

Not sure if this fits your specific trim? Email info@beatsonicusa.com with your year, model, trim, and audio system before purchasing.

Installation

No special tools required. No modifications to the factory wiring harness. Most owners complete the install in under two hours using our step-by-step YouTube video guides. Professional installation is available in Southern California through Beat-Sonic directly, or through our authorized installer network worldwide. Email info@beatsonicusa.com with your location or zip code to find the nearest shop.

Frequently asked questions

Will I need to replace my factory speakers or head unit?
No. The ENA-2T3 works with your existing factory head unit and speakers. You keep everything in place - the amp simply adds power and clarity to what you already have.

Is this compatible with aftermarket head units?
The ENA-2T3 works with aftermarket head units as long as the factory head unit retains the factory connectors that our ENA-2T3 plug and play harness connects to.

Is this compatible with JBL factory systems?
Compatibility with JBL systems varies by model. Some JBL models are compatible and some are not - check the compatibility list carefully and select your specific vehicle when ordering. If you are unsure, email info@beatsonicusa.com with your year, model, trim, and whether you have JBL before purchasing.

Can I use aftermarket speakers with this amp?
Yes. If using new aftermarket speakers, keep the impedance at 4Ω-8Ω.

Will my steering wheel controls and CarPlay still work?
Yes. All factory features including steering wheel controls, CarPlay, Android Auto, and your factory display continue to work normally.

What is the RMS output vs. peak output?
The 45W x 4ch rating is peak output. RMS output is approximately 23W per channel. RMS is the continuous power output your amp delivers - peak is during short bursts. This is standard across the amplifier industry.

How long does installation take?
Most installs take about 2 hours following our YouTube video guide. Professional installation is available in Southern California or through our authorized installer network worldwide.

Does this ship to Canada or internationally?
Yes. We ship to Canada and Mexico.

Show12243648

Selected

Toyota Vehicle Upgrades

Plug & Play Amplifier Kit for 2018-2026 Toyota & Lexus Factory Stereo - Beat-Sonic ENA-2T3

$299.00 USD

Policies

Footer Menu: Communication

Show