The Beat-Sonic ENX-T345 is a plug-and-play DSP amplifier kit tuned specifically for the 2022-2026 Toyota Corolla and Corolla Hatchback without JBL. It installs directly into your factory stereo system with no modifications to the factory harness, delivering a dramatic improvement in clarity and power across all frequencies and while keeping your factory speakers and head unit exactly as they are.
Professional local installation available in La Mirada, Southern California. Contact us at info@beatsonicusa.com to book.
Why your factory Corolla audio falls short and how the ENX-T345 fixes it
The factory Toyota Corolla stereo sends a weak, pre-processed audio signal that leaves your speakers performing well below their potential. The Beat-Sonic ENX-T345 intercepts that signal and strengthens and optimizes it before it reaches your factory amplifier and using a built-in 24-bit DSP processor, high-quality FET operational amplifiers, and carefully selected acoustic components including high-grade electrolytic capacitors, low-impedance capacitors, and extra copper thickness of 70μ on the circuit board. The result is a noticeably more detailed, powerful, and balanced sound across low, mid, and high ranges - without touching your factory speakers or head unit.
The ENX is tuned specifically to the acoustics of the 2022–2026 Toyota Corolla and Corolla Hatchback, meaning the DSP calibration is optimized for your exact vehicle rather than a generic one-size-fits-all setup. Fine-tuning is handled via PC software over USB for those who want to go further.
Key features
- Tuned specifically for the 2022–2026 Toyota Corolla and Corolla Hatchback - DSP calibration optimized for your exact vehicle, not a generic setting
- 45W x 4 channel Class AB amplifier - significantly more output power than the factory system
- 24-bit DSP processor at 48kHz - high-resolution audio processing for detail and clarity across all frequency ranges
- 31-band parametric and graphic equalizer - fine-tune sound to your exact preference
- Advanced crossovers - Butterworth, Bessel, and Linkwitz-Riley crossover types with slopes from 6 to 48dB/Oct
- Time alignment - precise staging control with 0.021ms increments for an accurate soundstage from your factory speaker locations
- 6 x RCA outputs - supports future expansion with an external subwoofer or additional amplifiers
- High-quality FET input stage - captures fine musical details including voice and breath tone at high resolution
- Plug-and-play installation - no cutting, no splicing, no permanent modifications to the factory harness
- Compact form factor - 700 x 103 x 45mm allows flexible installation location
- PC tuning via USB - adjust DSP settings using Beat-Sonic software on Windows 7 or later
- 6 storable presets - save and switch between different sound profiles
Compatible vehicles
Show all compatible vehicles ▼
| Make | Model | Years | Notes |
|---|---|---|---|
| Toyota | Corolla | 2022-2026 | Without JBL |
| Toyota | Corolla Hatchback | 2022-2026 | Without JBL |
Not sure if this fits your vehicle? Email info@beatsonicusa.com with your year, make, and model before purchasing.
Specifications
| Output power | 4 x 45W at 4Ω (14.4V) |
| Nominal speaker impedance | 4Ω |
| Amplifier class | Class AB |
| Inputs | 4 x high level speaker input |
| Outputs | 4 x speaker output, 6 x RCA (2.2V p-p) |
| Frequency response | 20Hz to 22kHz (+0 / -1dB) |
| S/N ratio | 105dB |
| Total Harmonic Distortion | 0.01% |
| DSP resolution | 24-bit |
| Sampling rate | 48kHz |
| Crossover | Bypass, Bandpass, Lowpass, Highpass |
| Crossover type | Butterworth (6, 12, 18, 24, 36, 48dB/Oct), Bessel (6, 12, 18, 24, 36, 48dB/Oct), Linkwitz-Riley (12, 24, 36, 48dB/Oct) |
| Phase control | 0 / 180 degrees |
| Equalizer frequency range | 20Hz to 22kHz, max 31 bands |
| Equalizer mode | Parametric and Graphic |
| Equalizer bands | Ch 1 and 2: 31 bands, Ch 3 and 4: 15 bands, Ch 5 and 6: 9 bands |
| Equalizer adjustment range | -15dB to +15dB |
| Q factor | 0.3 to 50.0 |
| Time alignment (distance) | 0 to 204cm (0 to 136cm for subwoofer and center speaker) |
| Time alignment (time) | 0 to 6ms (0 to 4ms for subwoofer and center speaker) |
| Time alignment increments | 0.021ms / 6.8mm |
| Storable presets | 6 |
| Remote output | DC 12V (max 100mA) |
| Power | DC 12V |
| Operating voltage | 10 to 15V |
| Max current draw | 15A |
| Quiescent current | 350mA |
| Fuse | 15A (5.2 x 30mm) |
| Dimensions | 700 x 103 x 45mm |
| Weight | 625g |
| PC requirements | Windows 7 or later, USB Type-A |
Frequently asked questions
Do I need to replace my factory speakers or head unit?
No. The Beat-Sonic ENX is designed to work with your existing factory speakers and head unit. No speaker or head unit replacement is required.
Is this compatible with the JBL-equipped Corolla?
No. The ENX is specifically for the 2022–2026 Toyota Corolla and Corolla Hatchback without JBL. It is not compatible with JBL-equipped models.
Does the DSP require tuning after installation?
The ENX comes pre-loaded with a tune calibrated specifically for the Corolla, so it will sound great straight out of the box. Further tuning is available via Beat-Sonic PC software over USB for those who want to customize their sound further.
Can I add a subwoofer later?
Yes. The ENX includes 6 RCA outputs including a dedicated subwoofer channel, making it easy to add an external subwoofer amplifier and subwoofer in the future.
Will this void my factory warranty?
The ENX uses plug-and-play connectors and does not permanently modify the factory harness. It is fully reversible.
Does this ship to Canada or internationally?
Yes. We ship to Canada and Mexico.