Connecting Axxess SWC to MVX-140L to retain the use of factory steering wheel controls with aftermarket head unit
Connect SW1 (White) on the MVX-140L to the Green/Orange (sometimes brown) wire on the AWSC-1. Connect SWG (Black) on the MVX-140L to ground (Black wire on the AWSC-1) Separate SW2 (Green) wire on the MVX-140L from each other by disconnecting the bullet connector and connect the Green wire (20-pin connector side. Not the adapter side)...
encore X plug & play DSP Sound files and customization of sound profile
The encore X plug & play DSP amplifier sound files have been tuned by Beat-Sonic to the same high standards as Japanese domestic model GR86 and BRZ. We do our best to meet the listening preferences for the majority of the market, but we do understand some owners have different...
Beat-Sonic encore X DSP Amplifier - RCA Pre-out when operating the DSP / OFF Switch
Main gain and Ch 5 / Ch 6 gain These gain controls will increase/decrease the output volume from the speaker outputs and RCA pre-outs. The subwoofer pre-outs on Ch 5 & Ch 6 may be set to 0.0dB gain, however if the master (main) gain is increased then all outputs...
Beat-Sonic Encore X Toyota GR86 / Subaru BRZ 4 Channel input vs 6 or 8 Channel output Explanation
For the 8 speaker the GR86 (and ZD8 BRZ), only the 2 x door woofers are connected to the factory amplifier. This factory amp is connected via high level inputs from the factory head unit front channel outputs. The dash mounted tweeters and dash mounted mid-range speakers are connected in...