Recent Posts

Pages: 1 ... 3 4 [5] 6 7 8
41
Customer's Rides / Re: Musee XA804 Amplifier
« Last post by Eric@beatsonicusa.com on March 15, 2012, 01:52:03 PM »
More set of pictures from a customer:



Front View


Removable sides for easier connection


Unique serial numbers:


Speaker wire connectors:


RCA Cable connection side:


Inside components1:


Inside components2:
42
Customer's Rides / Musee XA804 Amplifier
« Last post by Eric@beatsonicusa.com on March 15, 2012, 01:45:56 PM »
Product LinK: Musee XA804

Specification:
Rated Power: 70W x 4ch (4Ω) (210W x 2ch(4ΩBridged))
Maximum Output Power: 140W x 4 (4Ω)
Load Impedance: 2Ω - 8Ω/4Ω - 8Ω(Bridged)
Input Sensitivity: 0.2-5V (Each channel can be individually controlled)
Total Harmonic Distortion: 0.01% (1KHz/4Ω)
Frequency Response: 5Hz - 100kHz (+0,-1.5dB)
Signal-to-Noise Ratio: 100dB (1KHz/IHF-A)
Standby Time: Short Circuit/Over Voltage/Over Load/Thermal
Input Voltage: DC12-16V
Current Consumption: 1.2A (Idle) /40A (Rated Power)
Dimensions: 431(W ) x210(D) x 55(H)mm
Weight: 5.0Kg

The Package:


Package Contents:


Individual Serial Numbers:


Blue LED lighting up the Musee Acoustic Plaque


Full Copper Back:


Speaker Wires Connecting Side:


Amplifier Side View:


RCA Cable and Volume Control:


XA804 + XA802 with middle Connector



43
Background:
As of now, there is no plug and play solution for the 1998-2002 Nakamichi and Lexus Premium equipped LX 470 models to add aftermarket headunit. The only way in installing an aftermarket head unit is to bypass the factory OEM Nakamichi or Lexus Premium amplifier. However, if your vehicle is equipped with Mark Levinson, you may use the SLA-100FB/82AAD for a plug and play installation.

Needed items:
1. Dash installation kit: SLA-100FB
2. Aftermarket headunit + any additional peripherals that you want to install: bluetooth, DVD, ipod interface, etc.
3. Aftermarket 2 channel amplifier for the woofers.

Step 1: Locate the factory OEM amplifier under the passenger's seat. 

Step 2: Remove S10, 13 Pin connector from factory amplifier and connect new audio's speaker line to car side connectors.

13P Connector connected to factory amplifier. (S10)
FL+: Pin#2
FL-: Pin#7
FR+: Pin#1
FR-: Pin#6
RL+: Pin#5
RL-: Pin#13
RR+: Pin#4
RR-: Pin#12

Step 3: Factory OEM sub woofer will not sound after above installation. If you want to keep the OEM sub woofers working , please follow below procedures:

① Connect aftermarket 2ch power amplifier to new audio's woofer output.
② Remove the S11 connector from factory amplifier and connect 2ch power amplifier speaker output to car side connectors.

14PConnector (S11)
L+: Pin#1
L-: Pin#2
R+: Pin#6
R-: Pin#7

Additional Notes and links:
Without using an aftermarket 2ch amplifier, it is not possible to retain the use of OEM sub woofer.
LX 470 Stereo Wiring Diagram
44
saved for additional comments
45
saved for additional comments
46
saved for additional comments
47
Product Link: Beat-Sonic NVK-03
http://www.beatsonicusa.com/beatsonic-nvk-03.html

Compatibility:

2007-2009 Lexus ES 350
2006-2009 Lexus IS 250
2006-2009 Lexus IS 350
2008-2009 Lexus IS F
2007-2009 Lexus LS 460
2008-2009 Lexus LS 600h L
2009 Toyota Landcruiser
48
Product Link: Beat-Sonic NVK-03
http://www.beatsonicusa.com/beatsonic-nvk-03.html

Compatibility:

2007-2009 Lexus ES 350
2006-2009 Lexus IS 250
2006-2009 Lexus IS 350
2008-2009 Lexus IS F
2007-2009 Lexus LS 460
2008-2009 Lexus LS 600h L
2009 Toyota Landcruiser

How to remove radio:



How to take out Vent Clips: http://www.clublexus.com/forums/1697407-post88.html
How to take apart center console and to get to the correct harness: http://www.clublexus.com/forums/1648567-post1.html
DVD Bypass: http://www.clublexus.com/forums/1648567-post1.html
Nav Bypass: http://www.clublexus.com/forums/is-second-generation/254545-navigation-hack-part-two-destination-entry-while-moving-switch-diy.html
Change switch: http://www.clublexus.com/forums/6071610-post71.html
http://www.clublexus.com/forums/is-second-generation/614531-beat-sonic-navigation-over-ride-switch-replacement-diy.html#post6968542

Q: Is the Beat-Sonic NVK-03 compatible to be used with Vaistech?
A: Yes, Beat-Sonic's navigation in motion and video in motion modules complement the Vaistech adapter interface and works well together.

49
Product Link: Beat-Sonic NVK-03
http://www.beatsonicusa.com/beatsonic-nvk-03.html

Compatibility:

2007-2009 Lexus ES 350
2006-2009 Lexus IS 250
2006-2009 Lexus IS 350
2008-2009 Lexus IS F
2007-2009 Lexus LS 460
2008-2009 Lexus LS 600h L
2009 Toyota Landcruiser
50
Product Link: Beat-Sonic NVK-03
http://www.beatsonicusa.com/beatsonic-nvk-03.html

Compatibility:

2007-2009 Lexus ES 350
2006-2009 Lexus IS 250
2006-2009 Lexus IS 350
2008-2009 Lexus IS F
2007-2009 Lexus LS 460
2008-2009 Lexus LS 600h L
2009 Toyota Landcruiser
Pages: 1 ... 3 4 [5] 6 7 8